If you realize that the color of your car is beginning to get a little dreary and dingy looking or you simply decide you want a new look. The primary thought in your head is possibly finding a professional to give your car a new paint job. However, painting a car is not a job that may only be carried out by professionals, as a matter of fact you can get the job done on your own with only a couple guidelines and a bit of enthusiasm.

Therefore here are some instructions to help you get a quality finish right in your own yard, without paying for someone else to do it and without spending an arm and leg to obtain the needed materials.

Required Tools

Sander

Paint sprayer

Putty knife (optional)

Required Materials

Painter’s/Masking tape

Newspapers

Car washing detergent and brush

Putty (optional)

Wet Sandpaper (fine and thick grit)

Rustoleum high gloss paint

Odorless mineral spirits

Primer

4″ High density foam brushes

Paint trays

Clear coat

Power spin buffer

Instructions

Firstly you need to find a big area which is dust and dirt free because dust may be extremely detrimental to a good paint job. If you own a garage with enough space this would most likely be the best spot to do your painting.

As soon as you pick a place use the car washing detergent and brush to remove any dirt and dust from the car. Use newspaper and cialis mail order tape and thoroughly go around the car and painstakingly cover any place you do not want to be painted such as the windows and headlights. You ought to remove the bumpers too and spray them independently to make sure they are done properly.

Start with the thick grit sandpaper (600 grit) and then go over the car again using finer grades. A sander will really assist in this step therefore Tadacip it is recommended that you obtain one. The car ought to be wet sanded therefore use sandpaper intended for wet use.

If there are any indentations in the car, use the putty to knife to fill and smooth them with putty. Permit the putty to dry fully before handling it. If the base metal of the car is showing in any spots, paint them with a coat of the primer to guarantee that you obtain a level finish.

Now it is time to begin painting; you can use a paint sprayer to apply the paint faster or you can use a paint tray and a 4″ foam brush. Put on the primer foremost to set a good foundation for whatever color you plan to put on the car later on. When the primer dries sand it down to eliminate any bumps or paint marks. You ought to spray the car around 3 times to ensure you have a good foundation to work with.

Now you can move on to the colored coats; mix 50% paint to 50% mineral spirits to get the necessary consistency and put on at least 2 coats, or as many as you require to get the color you desire. Levitra Next apply around 3 coatings of the clear coat to safeguard your paint job; and your paint job is complete. Allow it to dry for at least 24 hours before washing or otherwise disturbing the paint job.

Use a spin buffer about 2 days after to really get the paint job to sparkle.

Tips

To decrease the amount of tape and newspaper work you need to perform, take off as many areas as possible that you do not want to be painted like the head and tail lights.

Let every coat to dry for a couple hours prior to applying another coat on top.

Author Bio: Please visit these links for more information on: How To Paint A Car and Paint A car.

Category: Home/Home Improvement
Keywords: Paint a car, car guide, painting job