If you are looking for a way to spice up the interior of your home at a low cost, tin ceiling panels or wallpaper may be exactly the thing you are looking for! They are modern, exciting, and exquisite.

They have a very eye catching look, and accent a room without having to paint, redecorate, or pour money into hiring an interior decorator. Best of all, if you are feeling creative and ambitious, you can do it yourself.

All you will need to begin with is a four foot level, a t-square, chalk line, drywall screws, a hammer, a tape measure, tin snips, a screwdriver or screw gun, a putty knife, and last of all, whatever tin panel wallpaper or trim suites your fancy.

To begin, you are going to start your installation by lining up your first tin ceiling wallpaper panel to a corner. This will keep your entire installation even, and will allow you to easily line up the remaining panels as you go.

Use crews to secure the male ends to the ceiling Kamagra as you go-the best part is there is no glue or mess with this kind of installation. Make sure your first panel lays evenly in the first corner, with the male ends touching the wall and the female ends facing outward to receive the next panel.

Use your square measure to double check that your first panel is perfectly even. This is very important because making a slight error at the beginning can create an uneven line throughout the rest of your entire ceiling.

Follow this standard slotted pattern from tile to tile until your tin ceiling wallpaper reaches the far wall. Use this same method in the other direction, checking over and over that they are perfectly straight, with your chalk lines.

Once you have reached the next edge, take measurements and cut fitted panels with your tin snips. Be careful, as the tin can have very sharp, rough edges.

Use your level and square as you go to keep that straight line, and flush level. Secure the last panel with a securing screw, on the cut ends closest to the wall.

If you are adding a trim, it works in much the same way. Start at the same corner, working your way around the edge of the ceiling.

This will hide all of the rough cuts you have made, and hide the securing screws you will need to install. Use your snips to cut the bend around edges as you go, until the entire strip is installed.

Secure them into place with screws on the female ends where they bend up to touch the ceiling. Your last piece should simply snap into place with the starting position of the strip.

You can keep the panels in their natural metal state, which is a very popular, vintage look. If you aren’t crazy about the metallic look, you can even paint your tiles-this will enhance the details in the patterns which are imprinted in them.

If you are going to paint them, you will need to completely cover your floors with drop cloths, as the paint will want to drip to the floor. You can sandpaper the edged surfaces of your panels to create a unique, antique look for them.

Simply scuff or braze all of the raised edges-this will also help the primer to stick better. Once you have finished this, you are ready to add a primer gray coat to each piece.

Your primer coat will help to mask the initial building material from being detected as not being real metal. Pay attention to every nook and cranny as you go, and get every raised surface.

If you leave some areas not as covered as others, you will notice that in the final stages. This may be a look which you want, and you can do this on purpose as well.

Last, apply a prime coat of silver for a metallic look, or any color paint you choose to the surface to bring out the details of the paper. Be sure that you prescription cialis generic are not allowing the paint to pool or drip.

To begin, apply a very light coat to make sure you like the look you are creating. Once you have done this, you can use your final coat to get all of the desired grooves and forms of your ceiling.

This ceiling will dazzle your friends and family, and give your home a very unique, vintage feel. Your imagination is the only limitation!

Author Bio: Jack R. Landry has worked since 1986 as an interior decorator specializing in ceiling decor. He has written hundreds of articles about decorating home and office spaces including finding the right kind of tin ceilings.

Contact Info:
Jack R. Landry
JackRLandry@gmail.com
http://www.tinceilingxpress.com

Category: Home/Home Improvement/Interior Design
Keywords: tin ceilings