Millions of people use a pneumatic tool everyday but few of them know how it actually works. Knowing how a pneumatic tool functions will not only help you make better use of it, but will also help you understand how to use it safely.

For a lot of people who are really serious about DIY projects, it is very important to have just the right tools for the job. Having the right tools will make your repairs easier and give you better results. Additionally, it is safer to use the right tools for the job. Many do it yourself types have the right tools but many do not know how they actually work.

This is very essential. If you are not well informed, you might hurt yourself or seriously damage your home. A pneumatic tool is one of the most popular tools used by home repair enthusiasts. These are wildly popular, since they permit the user to run a wide variety of DIY tools by simply using highly compressed air. How is pressure used in power tools? What are the components?

Compressed Air

You need air pressure to use pneumatic tools. Air provides the necessary power for this type of tool. The machine itself operates with the help of an air compressor having a gas powered pumping device that forces a continuous flow of air into a steel receptacle until it is sufficiently pressurized. Then, the tool is affixed to a hose which is hooked up to the steel tank by way of an air valve.

The high amount of air that is being pumped into the compressor causes it to be under great pressure. It is important to realize that the only way the air can be relieved and the air pressure controlled is through the release valve. This can only be opened or closed when the air hose of the pneumatic tool is connected. The valve opens once the hose is attached and the pressurized air then enters the hose. There is an air release valve at the end of the hose that will stay closed all the while you are using it until you attach it to the air gun. After this has been attached, the airway opens completely. This allows pressurized air to go into the air gun directly.

Air Gun

Lastly, there’s the air gun, which is necessary to be able to power the needed tools. All pneumatic tools, no matter what size or purpose, will be equipped with its own air valve or firing pin. Nonetheless, you will always find a safety mechanism on the tip of an air gun to ensure your safety. The ‘firing’ mechanism will be activated only if the tip of the air gun is pressed against some object, which means that under any other circumstances, air will be unable to flow out through the gun.

When you pull the trigger on the air gun, the firing pin on your pneumatic tool will open up the valve that is located in the gun. The moving air causes the barrel to blow air out at a very high velocity. This makes the tool you are using work properly. You can decide what kind of air compressor you need based on the type and size of tool you want to power. The reason is that the size of the tool will determine the amount of air it requires for operation, and not having the right air compressor might affect the overall proper functioning of the pneumatic tool.

Author Bio: Mark Scriven, marketing expert and author, writes articles on the internet, travel and home improvement. Stanley Bostitch UK offer a full range of Pneumatic Tools, including Nailers and Staplers for both construction and home improvement work.

Category: Computers and Technology
Keywords: pneumatic tool,pneumatic tool work,pneumatic tool functions,pneumatic tools