Whirlpool baths nowadays are considered as some of the bathroom essentials at home.Just like water, these baths take out the body’s thirst for rest. Similar to other things, these baths require proper maintenance and cleaning to ensure safety. Proper handling of this type of bath shouldn’t be taken for granted. It needs both regular care and a professional cleaning help to maximize the benefits of a whirlpool bath. Here’s a guide for everyone interested in buying one:

With each use of a whirlpool bath, the water is surely left with soap residues, dirt, body secretions, skin oils and bath oils. These residues, when combined with the mineral deposits from the water, may build up scale deposits. When not drained properly, the humid and dark environment of the bath can become a favorite location of the ever growing microorganisms that definitely would cause various diseases such as infections on kidney, vaginal areas, lungs, eyes, bladder and skin. To keep this from happening, always ask the manufacturer for a manual or a written guide to bath’s use and maintenance. Commonly, whirlpool baths cannot be cleaned by mere household products such as detergent soap, scrub, vinegar or baking soda. As a guide to whirlpool baths maintenance, it needs a about a half cup of shock treatment solution dissolved in a tub of water and have it set for about 15 minutes, then drain.

This process should be done at least two times before using the whirlpool bath. What it also needs is regular flushing that should be done every after use to take out bath residues and to avoid contamination. It might also require a regular professional cleaning help to fully remove the possible accumulation of scale deposits. The professional cleaning help should disinfect the entire circulation system and flush out water completely to descale the growing microorganisms. This can be done by using specialized equipment that produces heat to seep through hard to reach areas such pipes. The flooring, plumbing and wiring’s should also be checked on a regular basis too to ensure safety. For the motor box, it is recommended to have it installed on an accessible area to have it easily checked by a licensed contract plumber in case of a whirlpool breakdown. A heavy-duty electrical wiring with about 15-20 amps, depending on the whirlpool’s model, should be used as well to accommodate prolonged soaking.

As the whirlpool baths come in different models, the ways to operate it may also vary. However, as a general rule, whirlpool baths should be adequately filled with water. Normally, it requires about 50 gallons to fill the bath. Under-filling it might cause damage to pumps for some have sensors that would automatically shut off if the water level is too low. Moreover, never hesitate to ask the manufacturer for more tips about the proper way of operating. You would never want to risk yourself and your family by taking a few things for granted. Always seek for a complete manual or a written guide to whirlpool baths use and maintenance.

Author Bio: Whirlpool baths nowadays are considered as some of the bathroom essentials at home. Just like water, these baths take out the body’s thirst for rest. Similar to other things, these baths require proper maintenance and cleaning to ensure safety.

Category: Home Management
Keywords: whirlpool bath,whirlpool baths,whirlpool bath whirlpool,bath whirlpool,bath whirlpool baths