When ordering shutters you have to be extremely careful to get the measurements absolutely correct. If you get this wrong you can simply assume that your shutters will not fit correctly and will look unsightly in your room(s). This is not a mistake you want to make because put simply you will be out of pocket quite heavily as plantation shutters are not cheap by any means, especially if you are looking to cover large areas which is normally the case for most people.

The first place to start is to ask you supplier exactly what measurements they require to achieve the finish you want for your windows. Your supplier can only work off the dimensions you provide so if incorrect or they are left to assume this will result in problems for both parties. Ultimately if things do go wrong you can send them back but do not expect refunds and do expect alteration charges as this will not be down to the company.

If you are not confident enough to make the measurements yourself then get some help or ask your supplier to come and measure up for you. This may cost you a little extra but will ultimately save you a lot more money and hassle, also in this case it means your supplier will be responsible for a flawed product. Bear in mind aswell that the measurement taking is very much dependant on the blinds you are ordering. One mistake here could mean the positioning of your shutters will go absolutely wrong.

Some considerations to make when measuring for shutters is they are mounted from the inside which means they are buried in the window or wall. In this case you would seriously have to consider the depth that you are working with. The minimum depth or clearance to a window relates to fully opened shutters allowing them to smoothly move and make this transition.

Take care when taking the measurements of height, width, top, bottom and middle. Always be double sure when taking measurements and always get specific information in regards to the units required from your supplier. Ideally feet or meters should be used but never get yourself into a situation where your supplier has to make conversions because this is where things can go wrong.

One major consideration that is often overlooked is the shape of the window and how the shutters would actually be fitted. You need to check for tilts, angles, misalignments and frame strips and any other restrictions you may have when fitting the shutters. A small but simple recommendation for the masses out there never ever use a fabric tape measure always use a metal tape measure to ensure absolute accuracy.

I hope this helps anyone looking to install blinds, plantation shutters or anything else of the like in their property. Remember get the measurements correct for a brilliant finish or deal with the hassle of returning and having the whole job possibly redone. Good luck hope it works out for you.

Author Bio: Mithul Mistry is writing on behalf of Signature Shade, specialists in Plantation Shutters.

Category: Home Management
Keywords: plantation shutters