Have you ever looked at your television and thought if there was any cable from PC to TV that would allow you to hook up your PC to your TV and play your different files on a huge screen? If you have, you deserve some good news because there is indeed a cable from PC to TV that will allow you to do so; however, there are some limitations. Thus, it is necessary to follow the tips below so as not for you to end up wasting your time.

1. Identify the input connection of your TV.

Most television sets these days come with three types of inputs: coaxial cable input, RCA composite input, and S-video connector. Newer TV sets may also come with DVI, HDMI, VGA, or component video inputs but those inputs mentioned above are the more common types of inputs.

2. Identify the output connection of your computer.

Recently manufactured computers already have a built-in TV-compatible output; thus, it’s easier to connect cable from PC to TV quickly. The S-video particularly seems to be getting more and more common in computers and it is now usual to see VGA output that regular computer monitors hook up to.

3. Look for the right adapter for your connections.

You need an adapter to connect your cable from PC to TV. This adapter should have a selection of hookups on one end and a VGA adapter on the other. One good thing about this is that it is possible to take the adapter from television to television and it becomes possible to connect to all connectors. A wireless adapter is highly recommended. It may cost a bit higher; however, it is better not to have a mess of big cables and not keeping your PC near your TV set.

4. Connect the cable from PC to TV.

If you have an S-video jack or any computer output that is compatible with your TV, you just have to take the S-video cable and hook it up to your PC and your TV. If you can’t, then just attach the adapter’s VGA end to your PC and use the S-video, component video, or RCA cable instead to attach to your television set. After connecting everything, check if you are on the right TV video input. Press the remote’s input button until your TV acquires the computer’s signal.

After the computer’s signal is acquired by your TV, you are done. However, you should be aware that not everything is perfect when you connect the cable from PC to TV because the TV resolution is different from that of the computer. Your computer generates a different signal. The signals are usually in pixels such as 320×200 pixels but televisions can only get around 500 lines of resolution. Moreover, the television video amplifiers are not capable of handling higher resolutions thereby leaving your with a 640×480 maximum resolution. Nevertheless, you can still get an HDTV adapter for higher resolutions but be ready to spend 2 to 3 times higher that a standard adapter.

Author Bio: If you want to learn how you can watch up to 3.500 TV Channles directly on your computer, then make sure to take action for Instant Access

Category: Computers and Technology
Keywords: satellite tv, satellite, tv, movies, internet, communication, computers, technology, entertainment