Should you wish to craft your personal oyster card holder, ready all the items you will require, cut the duct tape, pile the duct tape pieces with the sticky part facing upwards, pile a second group of pieces with the sticky part facing downwards, craft a card pocket, secure the pocket, and put just about any final add-ons you want.

If you are living in the United Kingdom, you recognize just what an Oyster card actually is. Oyster cards are basically prepaid plastic cards which are used in London\’s Tube transport system. These cards commonly have a plastic wallet for storage. However, if you want to use a card holder which is more customized, you can consider creating your very own utilizing plastic wallet inserts or perhaps some other common items. Moreover, Oyster cards are generally about the exact same dimensions as regular plastic cards hence you may use the Oyster card holder you make for other types of plastic cards as well.

Prepare the items that is required

This particular project is simple to complete and utilizes items which you could readily acquire at home or get at any hobby retail stores. You need to have a few duct tape, a pair of scissors, and any accents of your preference, just like stickers, beads, colorful duct tape and various other decorations.

Cut the duct tape

Begin by cutting portions of the duct tape. Make sure the sections are about 2 inches wider than your Oyster card or any other card you are going to use the card case for.

Pile the duct tape pieces that you\’ve cut with all the adhesive facing upwards

Place 1 portion of the duct tape you cut in a horizontal fashion on a flat work top. Ensure that the sticky portion is facing way up. Stack some other pieces of duct tape beginning at the center of the 1st portion. Exactly like the 1st one, ensure that each of the pieces have the sticky portion facing up. The horizontal edges also have to be layered parallel to each other. Keep overlapping right until the overlapped piece is around 2 inches larger than your cards.

Stack a second set of pieces with the sticky part facing down

Do the same like the previous procedure. Overlap the duct tape however the adhesive side must be facing downwards. Press both of the overlapped sections together in order to shut the shell of your card case. Fold the sides that are exposed and push so that they will also be sealed.

Make a card pocket

Repeat the previous procedure to make a card pocket. Cut more pieces of duct tape and be sure they measure 1 inch longer compared to your card. Resume overlapping and halt once the piled pieces are 1 / 2 the width of the card.

Affix the pocket

Once you\’re done creating the pocket, attach it to any side of the card holder shell by using the tape. Tape three sections of the pocket but leave the 4th part, the one facing upwards, exposed so that you can utilize it as the opening of the pocket.

Put just about any finishing add-ons you desire

Slip your Oyster card or some other card through the pocket. Start embellishing the surface of your card holder using the adornments you prepared. Be sure that the accents do not hamper the efficiency of your creation.

Now you have your own personalized Oyster card holder that is unlike the generic ones used by everyone else.

Author Bio: Written by Douglas R. Williams. If you\’re searching for plastic wallet inserts which you can use for your metro or credit cards, visit http://www.everydayplastics.com/WalletInserts.php

Category: Society
Keywords: plastic wallet inserts