An ingenious option to make floppy disc sleeves is to utilize sticky notes. To get this done, you need prepare the materials you\’ll use, take the dimensions of the floppy disk, form the base, attach a chain of sticky notes, flatten the chain, and make a flap for the sleeve.

Floppy disc sleeves are helpful for organizing and also securing your own floppy discs. You can utilize adhesive back sleeves for containing your disks and preventing them from getting lost. On the other hand, you can make a sleeve on your own utilising anything as amazing as sticky notes. The latter option serves two functions as you not just fix your own diskettes, you could also reuse all of the sticky notes which you have utilized in your workplace or planner. Here are the ways you may follow if you are considering this particular craft:

Get the elements you will use

To create the floppy disk sleeve, be sure you have many used sticky notes, some tape, your floppy disk and a ruler or measuring tape.

Get the sizes of the floppy disc

You will have to know the measurements your floppy disk in order to make the container for it. Use a ruler or measuring tape to take the measurements of your own floppy disc. Take note of the sizes so that you will not forget.

Form the base

You can now begin creating the bottom for the sleeve. Take one sticky note and place it on the work surface. Be sure that the part with the adhesive is facing up towards you. Get a second item of the sticky notes and overlap the side using the first note include them. Make sure the adhesive side is also facing upwards. A seam is going to be formed vertically between the two sticky note pieces. Keep doing this phase until the entire overlapping sticky notes is two times the width of the floppy disc.

Link a chain of sticky notes

Connect a chain of sticky notes on the other chain. Make sure that it overlaps a little along the horizontal seam. Attach an additional separate chain of sticky notes that has the same size. Place a tape on the seam in order that it can be attached securely. Tape the left tip with the right tip of the sticky notes to attach them. This could create a rounded shape.

Flatten the chain

As soon as the tube has been created, press it in order that it will be flattened. An \”envelope\” will be formed with the top and bottom ends open. Fold the bottom portion of the tube slightly then flatten it. You can utilize the tape again to secure the lower portion.

Develop a flap for the sleeve

Slide the floppy disc to the open part of the envelope you shaped. Measure the width of the completed envelope so you can develop a flap for it. Connect additional sticky notes to the back section of the envelope. Be sure the adhesive side faces you. Slightly overlap the extra sticky notes to ensure that a seam will be shaped and tape them. Fold the sticky notes down, towards you. Turn the envelope over and fasten the flap you created using tape. Slide the envelope flap into the front opening in order that it will not be pulled out.

You can add additional reinforcements to make the sleeve more durable and attach labels to help you in organizing them.

Author Bio: Written by Douglas R. Williams. You\’ll find ready-made adhesive back sleeves for organising diskettes at http://www.dominoplastics.com/adhesive-back-sleeves.

Category: Society
Keywords: adhesive back sleeves, sticky back pouches