When most people think of home decorating, they think of moving furniture and hanging drapes. The do not realize just how much work goes into decorating a room. Whether it is laying ceramic tile for a fantastic looking floor, or getting the perfect color for your walls, it can be backbreaking work that consumes time, money, and energy. The most important thing about any home decor project that requires this kind of effort is preparation. Taking the time to prep the room is just a important as the job itself. Here are some tips for prepping your room for the hardest decor jobs.

– Painting Prep
– Laying Ceramic Tile
– Custom Window Treatments
– Lighting Is Everything

1. Paint Prep Takes Time

Prepping for painting takes time. A full 24 hours before you begin, wipe your walls down so that it is free of dust, cobwebs, and grime. Smoking puts a film of tar on your walls that is extremely difficult to remove. Imagine what it is doing to your lungs. You can cut tar off your walls significantly with an ammonia solution or bleach. Never mix chemicals together and always ventilate the room before you use a chemical. Remove crown molding and either remove or cover furniture, moving it to the center of the room to create space for rolling. Take all faceplates from electrical sockets and switches and place them in a plastic baggie after cleaning.

2. Prepare Your Floor For Tiling

Laying tile is a time consuming, painstaking ordeal that should be done by professions. If you just have to do it yourself, make sure you prep your area well before you begin. With a stiff push broom, aggressively sweep the floor, removing dust, dirt, and debris. Wash the floor thoroughly with warm water and a cleaning solution like pine cleaner. Scrap away old adhesives and raised spots for as smooth a surface as possible. Cover your floor with plastic until you are ready to rock and wipe or sweep one last time before you begin. Make sure you have the right tools, like the tile cutters that can be rented or purchased.

3. Window Treatment Brackets

Custom window treatments will require placing hardware and hanging heavy curtains or drapes. You will need a stepladder, usually four feet tall or higher, depending on the height of the windows. Once you have picked out your design, you will need to take measurements in height, width, and the depth of your windows. When your custom treatments arrive, install your brakets. If you are working on long windows like a picture window, you may want to install an extra support bracket in the center to prevent common problem of sagging in the middle.

4. Installing Runners Is Easy

Track lighting can be installed easily by installing the runners and kit that the lighting comes with; however, if you are installing recessed lighting, you will likely need to get into the attic. Make sure the way is clear before your lighting arrives. Be prepared with the same color paint as your ceiling for spot fixes that may occur like scratches from installation.

A Feeling Of Accomplishment

Whatever your project, you will be much better off if you are prepared before the project begins. It will go smoother and faster if you are ready and the final result will a fantastic room that you can feel good about, because you accomplished it with your own hands.

Author Bio: For more information please visit our Area Rugs website.

Category: Home Management
Keywords: bleach,ammonia solution ,furniture,home decorating,Home Decor ,Area Rugs