Hot tub water chemistry is an important factor when it comes to aiming for a pleasing and safe quality of water. Balancing the water chemistry makes the tub water perfect for a quality time in the water. Chemical levels are easily acquired and recorded in order to keep them from getting unstable and breaking loose in the water. The elements that are available in the hot tub water consist of pH, alkalinity and calcium which are essential in making the water free of any problems and at its best condition. These can be manipulated with the help of chemical products that either increase or decrease their levels in the water.

There is much available information on the internet that can help anyone achieve the best condition of water by focusing on the balancing of the chemicals in the water chemistry. These can be useful guides on how to properly adjust or stabilize each element in the water without affecting the others. Lucky for you, we have here a basic guide on how to deal with your hot tub water chemistry.

First and foremost, you need to be strict with the cleanliness of your tub. Always clean it whenever it needs or when it hits its schedule for cleaning. Unless you oxidize your hot tub, you should replace the water with fresh water for every three to four months although this may depend on how much you use the tub. Oxidation keeps the water clean and free of harmful elements that’s why the water needs less replacement and can be used for more than ten months. Make sure that you swipe the tub shell with a sponge and a cleansing agent to get rid of dirt and slimy substances on the tub. Let it rest for a while and dry it with using clean rags or a towel.

Add water until it reaches your desired water level or the required amount of water. Let it heat up until it reaches the appropriate temperature which is usually about 80 degrees Fahrenheit (30 degrees Celsius). When it hits that temperature, you can now run your initial water test to tell the actual level of chemicals and to have a reference on how much adjustment is needed. Slowly add the chemicals needed by the water in several portions to avoid over feeding it or underfeeding with chemicals. Run regular water testing for the second time to get the new level of the chemicals now present in the water. Adjust if necessary by using the same method of gradually increasing or decreasing the levels of each element that needs to be fixed. Repeat the whole process until you get to the safe zone where you can have a peace of mind that the water is now under control.

It’s now time to wrap it up and finish by shocking the tub water to sanitize it or to activate bromine if this type of chemical disinfectant is used. Read the manufacturer’s instruction to avoid using too much or too little of the water shocking product.

Author Bio: I write for Pool Prodigy about salt water pool maintenance and how to maintain a pool.

Category: Home Management
Keywords: tub water,water chemistry,hot tub water,tub water chemistry,tub water consist,tub water perfect