Do you have fluorescent lights in your home or office? You are not alone. Fluorescent lighting is one of the most common ways to illuminate an area. Those who deal with electric wiring and electric renovations deal with fluorescent lighting all the time. Repairing this type of lighting is fairly easy and a basic skill for homeowners to have. The first time you make a repair it might be a little intimidating, but once you get the hang of it you will find repairing and replacing fluorescent bulbs to be second nature. Start by reading the directions that come with the replacement bulbs and the fixture itself. These might tell you all you need to know about upkeep of these bright lights.

First, realize that fluorescent bulbs and tubes are the same thing. When people think of bulbs, they think of the elongated orbs most associated with lighting. Fluorescent lighting actually comes in cylinder shaped tubes, but they can still be called bulbs. They are installed differently than usual bulbs, but most people use the terms interchangeably.

If bulb becomes defective or burns out, it will need to be changed. Before buying a fluorescent fixture, make sure you understand what you are getting yourself into. Fluorescent lighting is expensive. You might get a great deal on the fixture itself, but the parts are costly. It is a lot like buying a printer. You can pick up a quality printer for under $100 these days. Good luck to you, though, when it comes to surviving on $100 worth of ink for any time. You will be spending way more on ink than you did for the original device. The same is true for replacement fluorescent bulbs.

If you notice your bulb flickering, it could be the bulb or the ballast. Lack of light can be caused by a blown fuse or it might be a dead bulb. First, check your power supply. If you can fix the problem by re-tripping the switch, your job is done and it was free to take care of. If this does not work, you might want to check the ballast. Sometimes the problem is not the bulb at all, but the ballast. This is the most expensive part of the light, so hopefully this is not the problem. It should be the last thing you check when troubleshooting.

Remember, a flicking in a fluorescent light can cause the ballast to overheat. This leads to it failing way before its time. It can also burn out, creating a more expensive problem or in some cases a fire hazard. When you notice your bulb flickering, do not wait too long to fix the problem. The longer you wait, the more expensive a problem you are going to have. Fixing a fluorescent bulb is a little like car repair. The longer you ignore something, the more there is that will go wrong and you will have major regrets in the future when you finally have no choice but to take care of the problem. Caring for your fluorescent fixtures is an important job for any homeowner.Ellie Lewis has often called on the expertise of a Dayton electric wiring specialist to fix complex electrical issues in her large office building. She hired a Dayton electric renovations specialist to update the wiring in her old house.

For more information about electric wiring go to
http://www.a-abel.com/Electric/default.aspx .

Author Bio: Ellie Lewis has often called on the expertise of a Dayton electric wiring specialist to fix complex electrical issues in her large office building. She hired a Dayton electric renovations specialist to update the wiring in her old house.

Category: Business
Keywords: Dayton electric wiring,Dayton electric renovations