Anyone in the industry of paper converting will be fully aware of what contract slitting is. If any type of cash register or receipt printer needs paper, this is paper that has been slit by a company specializing in slitting. It is important because it allows for the precise cutting of a sheet or roll of paper to fit the apparatus that needs the paper or flat medium. Though it has become less popular with the digitizing of receipt information, OEM slitting is still very necessary in many areas of printing and paper distribution. Understanding what kinds of machines are available is very useful to anyone interested in this process.

Small roll cutters are kinds of cutters that are most commonly used for thinner and smaller quantity rolls which are often used for cash registers, lottery tickets and other similar rolls. They operate on small diameter core rolls, allowing for a much slimmer cut. The best part about this type of cutter is that it is far faster than other cutters, simply because the cutting can be much smaller. Because they are so small, they are also the cheapest to run and the easiest to operate of most paper cutters. However, this also means that they can only cut a limited amount of paper when it is in operation.

In contrast to the small roll cutter, there are also large roll cutters. These, of course, are cutters that are designed to cut larger rolls of paper. This includes cutting of sheets of lamination, photos, masking and window tints. The major difference here is that large roll sitters will be far stronger than small roll cutters. However, as a result, they will also cut a little slower and will require much more energy to power them. This, in effect, makes them less efficient than small roll cutters.

Wide format cutters are a third type of the most common cutting devices. This kind of cutter is primarily used for large quantity cutting. This includes house wrap, landscaping and roof underlayment. The primary feature of this kind of cutter is that it works in much faster paces and with a much greater quantity. However, because it is so efficient, it is also the most expensive to run and operate of all of the cutters. Though there are other types of cutters that perform similar functions as these mentioned, the three machines here are the most common and often the most efficient. Each kind of cutting requires a different degree of machine to get the job done correctly. However, no matter what kind of paper cutting job needs to be done, one of these machines or a close comparison machine will be the most effective in most if not all situations.

Depending on what kind of cutting job is needed, these machines will be able to perform the job specified by the required cutting. In doing this, cutting can be accomplished on literally any kind of paper or flat medium. Understanding the different types of cutting will allow one to better understand what the process is and what it might be used for, depending on the situation.

Author Bio: Stewart Wrighter has been researching contract slitting in order to write an article on the subject. He searched the term OEM slitting to find a manufacturer in his area.

Category: Business
Keywords: contract slitting,OEM slitting