Everyone has at least one bathroom in their home and knowing how to deal with minor repairs is essential to a happy house. However, there are also times when calling in a professional for major repairs is an absolute necessity. Plumbing repair and toilet repair can help you get your john back on track and working like a dream. Have you noticed your flush is weaker than it should be? Some of the modern low-flow johns feature soft flushing, but if you have an old reliable john that usually gives a hearty flush, a weak surge might be a sign of a problem. Check the date of manufacture on the john. As long as it was not built from 1994 to 1997, you should be able to fix the problem. Johns made before 1994 might have a problem with water deposits from hard water. Clean out the tank and things should work well. The cleaning process needs to be done outdoors because acid is used to remove the deposits.

If you have a strong flush that is not pushing everything down out of the bowl, you might have a flapper valve problem. Watch the valve during the flush process. At least eighty percent of the water needs to drain from the tank for the flush to be effective. If this does not happen, you are likely in need of a new flapper.

Another common problem is lower water levels in the bowl. You flush the john and it works fine, but you notice a significant amount of water has drained from the bowl by the next usage. One of two things is probably occurring. There might be a partial clog in the colon portion of the bowl. To see if there is a clog, drain the bowl and use a flashlight to view into the colon. Occasionally, the problem is a crack in the interior of the bowl. The only way to fix this is to replace the entire toilet.

Have you noticed your john double flushes? If this is a recurrent problem, you probably have the water level in the tank set too high. Simply lower the level and the double flushing should stop. Phantom flushing is another problem related to double flushing. The tank is actually filling with water, which is really more of a phantom fill problem, but it seems like there is a flush problem. If this is happening, your tank is leaking water. Dye the water with food coloring and wait about ten minutes. If the bowl water changes color, you have a leak and the flapper needs replacing.

Finally, are you dealing with a whistling tank? Sometimes older johns have a ball cock valve that has a float on the end of a rod. As it floats higher it closes the fill valve. This leads to vibration and noise that sounds like your john tank is whistling. These old-fashioned valves are affordable and easy to replace, so if the whistling bothers you, there is an easy fix.

Stewart Wrighter has often called on the expertise of a Dayton plumbing repair specialist to fix plumbing issues in his large office building. He contacted a Dayton toilet repair specialist to replace a toilet in his mother’s home.

For more information about plumbing repairs go to
http://www.a-abel.com/plumbing/plumbing.aspx .

Author Bio: Stewart Wrighter has often called on the expertise of a Dayton plumbing repair specialist to fix plumbing issues in his large office building. He contacted a Dayton toilet repair specialist to replace a toilet in his mother’s home.

Category: Business
Keywords: Dayton Plumbing Repair,Dayton toilet repair