People who work on roofs, buildings, bridges, and other high places need to be protected in case they slip and fall. Many people are hurt and killed every year when they are working high above the ground and something happens to make them drop to the ground. Using fall arrest anchors can help protect you, your fellow workers, and employees from becoming a victim if they slip and head down towards the floor level. There are a number of different products to choose from, beginning with roof anchors, ladder safety systems, portable barrier and safety netting systems, horizontal lifeline devices and full body harnesses.

Roof anchors are devices that can be affixed to the roof that a worker can attach a life line to in case they start to slip. The life line can stop their descent when the rope tightens and cannot go any further. Some types can be permanently attached to the roof top edge, or you can get reusable ones that are removed after you are done.

Ladder Safety Systems are devices that have a cable running up and down the ladder. The worker wears a harness that has a locking mechanism attached to the harness and the cable. If they fall, the locking mechanism engages and stops the worker after a few inches. These are made for virtually all ladder heights.

Portable barrier systems are installed along the sides of a roof top and act like a fence to protect workers who are working along that edge. They are anchored to the roof and provides a worker with a sturdy structure that will stop her if she trips or stumbles.

Safety nets are installed under workers who are working on roofs, beams, scaffolding, and high lifts on construction sites or on bridges. They will provide extra protection if a worker starts to crash to the floor level. These should be used in conjunction with other safety measures.

Horizontal lifeline devices are similar to the ladder safety system in that a harness is worn and a line is attached to a cable. The difference is that the cable is stretched horizontally across a specific stretch of a work zone space and there is not a locking mechanism to stop the fall. Here the safety line is of a very limited length and that is what will stop a worker from continuing their descent.

Fully body harnesses are wrapped around the shoulders, waist, chest, and under the legs and inner thighs to give total harness protection. These are attached to climbing ropes where a worker can swing freely from spot to spot, and where setting a ladder or scaffold is too time consuming to get a quick task completed.

Depending on the type of work one does and the conditions that are doing that work under will most often decide the best items to use. However many of these things should be standard items to be found in roofing, construction, and window washing equipment supplies that are always kept in stock within a company\’s equipment supply room and vehicles.

Developer of Fall Arrest Anchors and restraint systems that are exclusively designed to best accommodate your building\’s specific proportions. With over thirty years of experience in seven countries you can trust the experts in Roof Anchor.

Developer of Fall Arrest Anchors and restraint systems that are exclusively designed to best accommodate your building\’s specific proportions.
http://www.pro-belgroup.com

Author Bio: Developer of Fall Arrest Anchors and restraint systems that are exclusively designed to best accommodate your building\’s specific proportions. With over thirty years of experience in seven countries you can trust the experts in Roof Anchor.

Category: Business
Keywords: roof,anchors,technology,equipment,industrial,recreation,business,home,family,internet,economy,financ