A door is designed to protect the people who are living inside the house. These act as a barrier that will give privacy and security against people, weather, animals, and other things that can be risky and dangerous to the owners of the house. Due to longer uses though, most of these accumulate holes through various reasons. Patching up these openings immediately is the best thing to do to protect the structural integrity of the door as well as to prevent further damages on the structure.

Patching a hole can be done in several methods that can be accomplished by any average person. Although the work would not turn out to be as smooth as that done by a professional, you can always expect a good outcome especially if you give your best and with the aid of the right tools and information. This article will help and guide you with tips regarding how to fill up holes on the various areas of your exterior and interior doors. Maintain the good condition of these barriers by covering up any cracks and crevices that you can spot.

-Inspect – although you do not see the tiny cracks and crevices, there are actually many of them lining on your door. These are the main causes of the larger holes that started from little openings that gradually increased in their sizes. Check the door from the top to the bottom to make sure that everything will be covered up and sealed for the protection of the structure.

-Mark – it is important to mark tiny holes with something that can be erased after the job is done. This is in order to make sure that everything has been covered up and that there are no missed spots on the various areas of the door. A pencil can be a good tool for marking purposes as it can be easily erased after serving its purpose.

-Method of Patching – foam filling is the type of method used for patching up all sorts of holes on wooden doors. This method is proven to be effective in providing a filling as well as a surface that is similarly smooth to the original door. When patching up the holes with foam, make sure that you let the solution sit overnight to dry up and become hard enough for you to be able to cut off the edges and smoothen up. Be very careful when it comes to the trimming of the edges as you might accidentally cut larger chunks of the foam. In return, you will need to patch again in order to correct and fill the empty holes. Use a quality vinyl putty to even and smoothen the surface of the door. Make sure that you leave a nice, smooth patch of putty to make the surface look natural in order to make it hard for people to notice the repair. Afterwards you can paint or stain the patch to the exact color of the original door depending on your preference.

I write for TIR Massage Stone about choosing the right hot stones for a hot stone massage kit

I write about hot stones and hot stone massage kit information for http://www.TirMassageStone.com

Author Bio: I write for TIR Massage Stone about choosing the right hot stones for a hot stone massage kit

Category: Advice
Keywords: hot stones, hot stone massage kit