In case you see any problem with your PlayStation 3, don’t panic and ship it off to technicians that will charge hundreds of dollars to repair it. It is far much less expensive repair your gadget using various techniques and methods.

The common problems of PlayStation 3 are normally the Yellow Light of Death and the Red Light of Death. The Yellow Light of Death is as a result of overheating in the unit. This happens because of the low-grade thermal paste or heat sync paste on the processor or if there is any loose cable in the console. Unplug the console from the power source and all other cables and then plug them all back in. This should be done regularly especially when the console sounds odder than usual and it feels hotter to your touch. Provide enough ventilation to prevent overheating. Do not put the PlayStation 3 console flat on the ground. Clean off the dust to make sure that there is free flow of air to the console. Finally, replace the hard drive. You can also try to remove the old hard drive and replace it with a new one. These interventions can also be used to deal with disk error and error codes.

To rectify the Red Light of Death, the red screen when you first turn on the console, one needs to unplug the power cable for at least 24 hours. The owner should then remove and replace the hard drive and thoroughly clean the console with a vacuum cleaner.

To correct the freezing errors, restart the console and if it does not work, wait for few hours and restart it again. Check for any loose wire connection by unplugging the connection and connecting it back. One can also update the PlayStation 3 firmware since it can be old and it is important to upgrade. Removing and reinstalling the hard drive can help in fixing some of the console problems. If the problem persists, then it is advisable to send the unit for repair.

Other tested and proven ways of repairing your PlayStation 3 at home is blowing the hot air into the back of the box for 10-15 minutes using a heat gun. This will help in rectifying any loose connections in the motherboard that resulted in short-circuit and hence making the system to malfunction. Another common error in the game box is the no display sign that is majorly attributed to faulty resolution settings. The quickest and safer way to resolve the faulty resolution settings error is getting the standard setting resolutions and restarting the system.

I recommend to the console owners to try these interventions before thinking of sending their units to the manufacturers for repairs or replacement or to other computer repair shops. However, sending these units to the manufacturer takes usually take a longer time, usually over six weeks. It is a long time to wait for gamers. If the PlayStation 3 console has no warranty, the total amount of expenses that you need to pay is bigger than expected. In some cases, when the item is already back, the console owner may not be satisfied with the result.

PlayStation 3 Repair It is always a better option to get your PlayStation 3 repaired quickly and as soon as it gets faulty so that you do not risk it further getting any problems. A PlayStation 3 console is very precious for many people and hence it should be taken care of. Click here for PlayStation 3 Repair Service

All equipments have a tendency to get some problem and a PS3 too comes under this category. Visit our site http://www.endlesselectronics.org/ for more details.

Author Bio: PlayStation 3 Repair It is always a better option to get your PlayStation 3 repaired quickly and as soon as it gets faulty so that you do not risk it further getting any problems. A PlayStation 3 console is very precious for many people and hence it should be taken care of. Click here for PlayStation 3 Repair Service

Category: Entertainment
Keywords: PlayStation 3 Repair Service, PlayStation 3 Repair, Yellow Light of Death Fix