In many areas there are neighborhoods built over an area with a high water table, or close to a lake. There are always issues with water and moisture that can leak through the foundation. This article will explore the background of basement systems and how to block hydraulic pressure to keep your foundation dry.

One of the first systems many contractors will do to waterproof the foundation is to dig down outside around the house. They will tar and seal the outside wall to prevent water from entering through the wall. This is a tried and proven system, but it takes a large amount of excavation work to accomplish this. If your driveway is blocking digging, that will have to be torn up, thus making this a very expensive project.

Another proven technique that companies use is a drainage layout that keeps water away from the house. Around the outside walls are dug down about three feet and channels are dug ten feet heading away from the house. They will back fill these channels with a corrugated tube to allow water to flow directly away from the base. The water is allowed to settle in the ground ten or more feet away from the foundation.

If you do not want to dig outside the next waterproofing system will focus on the walls of the basement. A contractor will actually drill several holes into the walls will inject a silicon or rubber material into it. This direct injection method creates a barrier inside the fall and fills and cracks. This may be a cheaper alternative to digging outside.

Another option that you can look into is coating the inside walls with a paint or silicon rubber type material. This will act as a barrier to seal holes and cracks in the foundation. This coating or sealant is readily available at the local hardware store and you can do this project by yourself.

One system that contractors use is to cut drainage channels at the inside base of the wall. These channels are cut to allow water that may leak in to gather at the base and then be channeled into the drainage pipe in the floor. Eventually all basements will leak, this is an additional option or insurance policy to help keep floors and carpet dry.

A traditional system used is to cut a hole in the floor to allow water to gather called a crock. Inside this hole is a sump which is used to pump gathering water back outside. This is is very common in houses in a low lying area or high water table. These are one of the most common items installed by contractors.

If you need to keep your foundation dry because of water coming in, you should look into the background of basement systems. There are several different options you can choose from at varying costs. Each system has it\’s positives and negatives, so you should consult with several contractors to get advice on the best option available.

Professional wet basement or foundation crack repair services are ways to ensure that your basement will stay dry from leaks.

Professional wet basement or foundation crack repair services are ways to ensure that your basement will stay dry from leaks. http://www.waterproofingsolutions.ca/

Author Bio: Professional wet basement or foundation crack repair services are ways to ensure that your basement will stay dry from leaks.

Category: Marketing
Keywords: market research,surveys,data collection,focus groups,marketing,business,services,consultation,b2b,