PS3 YLOD is one of the LED light indicators in the game console that houses the main power and the system of the unit. It shows that there exists a problem in the internal parts of the gadget and gives warning on the existence of errors in the unit. These errors can be as a result of the unit overheating, unstable or loose physical connections and loose hard drives.

When PS3 YLOD light blinks on the console, an immediate fix needs to be sought, before the problem gets worse that may require incurring expenses in repairs or replacement. One of the methods of fixing the problem is to power cycle the device by turning off the power and unplugging it from the power source. Leave the gadget to cool for half an hour before plugging it back again. This will solve the problem, if it was caused by the overheating of the system.

Alternatively, assess all the external physical connections. Keenly check, if the wires are properly connected and if any of the wires are exposed. In case, you find any loose connections, fix them tightly. If there are any exposed cables, replace them with better ones. This will solve the PS3 YLOD problem, if caused by loose connections and exposed wires.

Suppose the problem persist, open the device and look for any internal loose connections that might have been caused either by console falling or exposed to a higher electric shock. Tighten any visible internal parts and connections.

PS3 YLOD can also be fixed by the use of a heat gun to blow the hot air into the back of the console for 10-15 minutes. This process will make any soldier joints resets itself, in case there are any loose connections. Don’t use a hair blow dryer instead of the heat gun to blow hot air, since the hair blow dryer will not provide enough heat to rectify the problem. After turning the heat gun to medium heat, get the unplugged console rear vents facing you and blow the hot air into the back of the box for 10-15 minutes. Place the unit in front of a fan to cool it down.

If you cannot fix the PS3 YLOD, then check the gadget warranty and if binding, send it back to the manufacturer to make sure that the fix is properly done. By doing so, you can save money since they will not be charging anything from you, if it is still within warranty time.

Before sending your console for any repair or replacement, try the above methods of fixing your console. Fixing the problem with the above methods is easy and practical, but care should be taken, especially when trying to fix any internal loose connections. This method is recommended because the procedure is easy and you can save money before thinking of shipping your unit for repair. Even if the warranty is applicable, the owner of the gadget will still incur shipping costs and thus the need of trying these home solutions for fixing PS3 YLOD is a good option.

Fix PS3 YLOD It is always a better option to get your PS3 repaired quickly and as soon as it gets faulty so that you do not risk it further getting any problems. A PS3 console is very precious for many people and hence it should be taken care of. Click here for PS3 YLOD Fix

All equipments have a tendency to get some problem and a PS3 too comes under this category. Visit our site http://www.endlesselectronics.org/ for more details.

Author Bio: Fix PS3 YLOD It is always a better option to get your PS3 repaired quickly and as soon as it gets faulty so that you do not risk it further getting any problems. A PS3 console is very precious for many people and hence it should be taken care of. Click here for PS3 YLOD Fix

Category: Entertainment
Keywords: PS3 YLOD Fix, YLOD Fix, YLOD PS3 Fix, Fix PS3 YLOD