If you are thinking about attending a fire and electrical safety training, but would like to find out a little more about it beforehand, this is the perfect article for you. Listed below you will find the top eight things taught in this type of training, complete with a brief description.

– During fire and electrical safety training, you should have the opportunity to learn what a fire safety plan is, how it should be designed, and what its purposes are. You should also learn how to designate fire exist, how to instruct staff members to act in case of any emergencies, the correct way evacuation must be performed, and all the procedures needed to be done in response to a fire breaking out.

– P.A.S.S. – is the acronym used to remember the steps one needs to take in order to successfully put out a fire using the fire extinguisher. The four letters stand for Pull, Aim, Squeeze, and Sweep. The term pull implies pulling a pin to break the plastic seal; aim refers to aiming at the base of the fire; squeeze means squeezing the handles of the extinguisher together; and sweep refers to sweeping from one side to the other and vice versa.

– Another acronym you will hear during fire and electrical safety training is R.A.C.E. This acronym is used to designate the steps one must take in case of a fire emergency. “R” stands for rescue, “A” for alarm, “C” for contain, and “E” for extinguish.

– The term rescue refers to immediately stopping any activity and removing all those found in the immediate area of the fire. Alarm refers to activate any fire alarm pull station found in the vicinity and calling the fire department and the front desk.

– Contain refers to closing any doors and windows found on your way out, in order to contain the fire and prevent it from spreading.

Extinguish refers to trying to put out the fire using the nearest fire extinguisher and following the procedure presented above.

– Following the fire safety portion of the training course, you should be introduced to the meaning of electrical safety and you will find out a few general precautions any employee should know.

– For those working in the medical field, electrical safety training has a portion detailing a few things about patient electrical safety. More specifically, medical personnel will how to secure electrical devices and how to report incidents involving faulty equipment.

– Medical personnel are instructed to pay attention at power strips and electrical cords and to notify management in case any malfunction is detected. Electrical safety training will teach you the right protocol for reporting electrical hazards.

The list can go on, but these are some of the most important topics taught during fire and electrical safety training. The information presented above should help get a general idea of what this training is all about.A complete list of topics for this course can be found online, on any healthcare training company’s website.

For more information, please visit our Fire and electrical safety training website.

For more information, please visit our Fire and electrical safety training website http://www.hipaaexams.com/fire-and-electrical-safety-training.asp

Author Bio: For more information, please visit our Fire and electrical safety training website.

Category: Education
Keywords: Fire and electrical safety training