The YLOD error is commonly known as the Yellow Light of Death which is a pretty common issue that occurs in PS3 consoles. The main reason for its occurrence is due to the over-heating of the console. When the console gets over-heated, it renders the heat sinks unstable and loosens them, which stop the console from loading up. Getting a permanent PS3 YLOD fix is a pretty difficult task, as the problem tends to keep on occurring after a few days or so. It is generally accepted by many people, that once the YLOD error occurs in a console, it should be discarded or replaced. However, those people who do not have the funds to get their consoles replaced will only have to opt for a fix. In the following article, we shall talk about two ways of fixing your PS3 YLOD error. However, it should be noted that both of these methods should be tried at the user’s own risk, as they can backfire and cause further harm to the console.

The first PS3 YLOD fix that we shall talk about is very simple. However, this is a permanent fixture and will not last very long. As is commonly known, the YLOD error only occurs because your console fails to boot up all the components on the motherboard, which happens because they get partially detached. The ‘Towel Method’ as it is known, can allow you to ‘cool’ your console excessively, by putting the fans of the console into hyper drive and making it run. Firstly, you must take two sticks and make sure they are strong. The best option is to choose strong wires that do not bend.

Turn on your PS3 and once the yellow light has begun to display, check the back of the console. You will find that the fans would be running, because the console is powered up. If the fans are not running, this step becomes useless for you. Those who can see the fans running, they must stick the wires in to the fans, causing them to stop. Now, as the fans stop, your console will begin to heat up. Put a towel on it, and wait for at least 2 minutes. Your console should be excessively hot now. Turn it off now and restart the console. It should start to run. However, you should know that this is a temporary method, and your console can be harmed in the process.

Because your console would be over heated, it can be permanently damaged beyond repair as well, so do take caution before trying out this method. It can permanently render your console useless, as the sockets on the motherboard might burn out due to overheating. Even if it does work, your console might not last more than a little while, but once it does turn on, it will keep running until you shut it off and try opening again.

As for the other method, the best option is to play it safe and purchase a PS3 YLOD fix guide in order to get detailed instructions or you can just take your console to a professional console repairing expert in order to get it done. However, either of these methods might charge you money, so it might prove to be a bit costlier than the former method. Secondly, there is no guarantee at all for any of these methods, so you can be pretty sure about the fact that your console is going to stop functioning at some point in time as the permanent success ratio is very slim.

PS3 YLOD Fix It is always a better option to get your PS3 repaired quickly and as soon as it gets faulty so that you do not risk it further getting any problems. A PS3 console is very precious for many people and hence it should be taken care of. Click here for Fix PS3 YLOD.

All equipments have a tendency to get some problem and a PS3 too comes under this category. Visit our site http://www.endlesselectronics.org/ for more details.

Author Bio: PS3 YLOD Fix It is always a better option to get your PS3 repaired quickly and as soon as it gets faulty so that you do not risk it further getting any problems. A PS3 console is very precious for many people and hence it should be taken care of. Click here for Fix PS3 YLOD.

Category: Business
Keywords: PS3 YLOD Fix,YLOD PS3 Fix, ix PS3 YLOD,PS3 YLOD Repair