Everything in the kitchen would seem to be running smoothly until there is a clogged pipe seeking your attention. A clogged pipe is a difficult task to deal with since the underlying problem is tough to ascertain if you are not a plumber. There are many reasons for clogging of a pipe including salt deposition on the inside, air blocks, corrosion, and other reason. You do not need to turn to the plumber each time you face the problem of problematic drains and clogged pipes. If you can identify the problem quite early, you can solve the problem of a clogged pipe on your own with basic tools and do-it-yourself techniques.

First of all, identify if you are having a clogged pipe before wasting too much time to fix it. At times, pouring a cup of hot water could easily wipe out any small obstacles. If your kitchen sink is giving out foul scent, making strange gurgling noises every time you turn on the tap or if the water is taking ages to pass through the sink, there are high chances of clogged pipes.

Based on the location of the obstruction, you will have to begin the task of fixing the clogged pipe. It could either be in the waste pipe outlet in the bathroom wash basin or bath tub or the kitchen sink. Build-ups of scum, hair accumulation, and kitchen waste are the most common reasons for obstructed pipes. You could try any of the below methods for unclogging the drains:

1. Cleaning the U-bend trap: The u-bend trap refers to the waste pipe that runs below the plug hole in sinks and from washbasins. The tube mainly comprises some amount of water to eliminate the bad odors that could arise from the sink. The simplest way to fish out obstructing items from the tube is by positioning a bucket below and using a wrench. Detach the waste tube and empty the water into the bucket. Now, use a lengthy wire and push out the debris that is causing the problem. Flush the clogged pipe with some warm water and detergent solution.

2. Cleaning the basin and sink: Using the plunger is the best solution for this situation. A plunger is a handy tool that has rubber suction at one end that serves ideal for cleaning drains. You could consider smearing some grease on the surface of the cup. This can be followed by firmly pumping the plunger up and down, few times covering the whole plug hole. This suction would loosen up the waste material that was clogged inside the pipe.

3. Snake to the rescue: If the plunger has failed to do the job because of the complex clog, you can try using the snake. It is a lengthy steel wire that is flexible. Shove the snake down the drain by constantly twirling. This helps greatly in releasing the waste through the pipe. Do this a couple of times to get rid of the clogged pipes.

For more information on drain plumbing, visit our website athttp://www.waterworkscanada.com/clogged-pipes/ or Water Works Canada

For more information on drain plumbing, visit our website at http://www.waterworkscanada.com/clogged-pipes/ or Water Works Canada

Author Bio: For more information on drain plumbing, visit our website athttp://www.waterworkscanada.com/clogged-pipes/ or Water Works Canada

Category: Home Management
Keywords: clogged pipes, pipes, repair, plumbing, drainage maintenance, home maintenance, pipe cleaning