Inspecting Your Vacuum Cleaner
One of the most important tools of the trade of a cle
aning service is the vacuum cleaner. Countless housewives can attest to its effectiveness in quickly cleaning the entire house while helping them save time and give them more opportunities to rest. A vacuum cleaner is perfect for eliminating allergens and other contaminants from wherever your clients want to clean, such as upholstery and carpet. For a cleaning service, a vacuum cleaner is indispensable for certain types of work and having a properly maintained unit can save precious time and efforts while keeping the client satisfied as well. To keep it on top condition and working efficiently, you only need to inspect your vacuum cleaner once a month. To prolong the life of your vacuum cleaner, you have make sure that the suction parts are free of debris as these can cause internal parts to break and you would need to spend a lot more for repairs.
A good rule to follow which most people tend to conveniently forget to do is to read the manual that comes with the machine. As a cleaning service business owner, this is one thing that you should always pay attention to and never forget before operating any piece of equipment. You can find the normal maintenance needs of your vacuum cleaner there.
Here are some general guidelines in checking your vacuum cleaner:
1. The first thing to inspect is the bag, preferably each time before you vacuum. You need to change it when it is about half full. Check for any tear; change it if you find any. The bag must be clean and intact so it can let the air to flow freely and stop the release of dust into the air. For bagless type, it is important that you make sure the dust compartment is empty before starting to vacuum.
2. Vacuum cleaner filters must be cleaned or changed as per manufacturer recommendation. Cleaning efficiency is reduced if it is clogged. Try to get bags or filters with high efficiency for capturing fine dust particles.
3. Brushes and brushrolls come into constant Cialis contact with surfaces to be cleaned. You must inspect them for wear and tear, and keep them cialis 5 mg daily free of grime and dirt so they can move freely. Debris Brand Levitra on the brushrolls and their bearings can greatly impede movement and strain the motor excessively and reduce its service life.
4. Your vacuum cleaner has a belt is always subjected to stress each time you operate the machine. You must change the belt every three months, especially if used frequently, even if you don’t see any sign of tear or wear. Make sure it is not loose or worn.
5. The cord also needs special attention. Make sure there are no twists or cracks in the cords as these could pose an electrical hazard for everyone where the vacuum is being used, from your crew to your client. If you see any crack or exposed bare wire, immediately replace it with a new cord.
Depending on your model, repairs can go up to about $500 so that inspecting your unit to make sure there are no loose or worn parts can save you not only time but precious dollars as well.
Author Bio: Loren Yadeski, author of this article is also interested in cleaning supplies and recommends you to please check out cleaning services if you liked reading this information.
Category: Business
Keywords: cleaning, cleaning service, cleaning services