Because the bathroom is one of the most used rooms in the home and it is connected to the plumbing system, it is important for homeowners to make sure the plumbing in the bathroom is working properly. Fixing the plumbing in a bathroom may seem like a huge project, however, many homeowners take on the project and soon discover that it is not that difficult when they do their research and create and implement a solid plan.

Below are a number of tips on fixing your bathrooms with proper plumbing:

Plumbing Pipe Inspection: It is important to check all of the pipes running to the toilet, shower, and sinks. Check to see if they are old and worn and if there are any leaks. A pipe inspection is normally performed by a professional. If there are issues with the pipes, they should be replaced.

Faucets: Faucets can often become worn and leaks will develop. You may want to replace the faucets with water efficient faucets. Types of faucets include: wall-mounted, single lever (made for 3 hole pre-drilled sinks,) Widespread (made for pre-drilled 3 hole bath sinks, and Center Set (made for 3 hole pre-drilled basins.) As well, match the sink fixtures with the depth and width of the sinks. Adding an aerated spout will allow for control over water flow and pressure. An aerated spout twists onto your faucet, and by mixing air with the water, it can reduce water use without reducing water flow.

Prevent Frozen Pipes: If the pipes are exposed to the cold, you should surround them with insulation to prevent the pipes from freezing, cracking, and bursting. You can insulate the pipes by covering them with foam rubber or insulation.

Conserve Water: If you want to save on your utility bills, install a low flow toilet and buy a low-flow shower head. You will use much less water which is good for the environment and your wallet.

Seal Exposed Areas: If there are any cracks around the crevices of the plumbing fixtures such as the toilet and faucets, you can seal the edges with water-resistant caulking. Also, check the edges around the bathtub to see if caulking is needed.

Proper Venting: It is important that the bathroom maintains proper venting. For instance, if a vent becomes filled with water resulting in restricted airflow, the balance of pressure will reduce and the water will be sucked out of the traps. As well, wastewater will be prevented from draining. If the vent pipes are in poor shape, you should replace the vent pipes with new pipes.

Making improvements to the bathroom will make the bathroom look and function better. Fixing your bathrooms with proper plumbing does not have to be an expensive project if you understand what is involved with plumbing repair. If you are unsure about what to look for to fix your bathroom plumbing, you should enlist services of a professional plumber who has the knowledge and experience to perform a thorough inspection, identify any problems, and advise you on the proper repair.

Author Bio: Looking for a local plumber to fix your plumbing problems? Then contact the plumbing experts at Mr.Rooter, offering plumbing Kamloops and plumbing St. John’s services as well as plumbing services all across Canada. Visit mrrooter.ca to find a plumbing franchise in your city.

Category: Home Management
Keywords: home,plumber,water systems,home renovation,home improvement,family,business,society,advice,finance