Seven Easy Guidelines to Make Your Personalized Safe Futon Bunk Bed

To build your own futon bunk bed that is safe for your needs and also your loved ones, you\’ll need to get 2 futon beds of similar dimensions, prepare the wood to be utilized for your bunk bed frame, make the bunkbed body, place the futon casing to the bunkbed body, install a ladder to your bunk bed, put on a surface to your newly made futon bunkbed, and assess your bunkbed before actual use.

Acquire 2 futon mattresses of similar measurements

To begin with, you need to get two futon bed pieces of the same size. Determine the sizes of each and every portion of the futon bed to ensure that they are of similar measurements in order to have the sizes you\’ll need to have in order to assemble the casings for your futon bunk bed .

Set up the wood to be utilized for your bunk bed body

So that you can affix your futon mattresses and make them into a bunkbed, you will need to prepare the boards and try cutting it with regards to the sizes of the 2 futon beds to be used as the frame. The frame must include bed headboards, foot planks, and posts. Make sure you also have extra wood for the ladder to be attached later on.

Build the bunk bed frame

Immediately after cutting your lumber, you can construct the bunk bed frame simply by drilling appropriate holes in your posts to affix your bed headboards, foot boards, and sideboards. Assemble the parts of the bunkbed framework using bolts, nuts, as well as washers and be sure they are indeed securely secured.

Affix the futon casing to the bunkbed body

As soon as your bunkbed frame is completely ready, you can connect your futons casings to it. Punch holes in the head and foot panels just right to contain the mounting bolts that come with the futon frames. You can even get a brand new set of bolts, washers, and nuts which will match in the holes of your bunkbed frame posts. After attaching both structures to each other, fasten the mounting bolts to ensure your futon bunkbed is definitely tightly affixed.

Install a ladder to your bunk bed

Build a ladder that will allow you to get to the top bunk. Preferably, the ladder must really be attached close to the base of the top bunk bed\’s sideboard down to the sideboard of the bottom bunk. The ladder can also be positioned at the foot panel of the top bunk right down to the foot panel of your bottom futon bed if you prefer. The ladder needs to be attached using either iron mounting brackets or just by nailing both sides of the ladder to the side or foot decks of the futon bunk bed.

Put on a finishing to your newly assembled futon bunkbed

Once you\’ve tightly affixed the ladder, and also the futons to the frame, even out the bunkbed boards with sand paper. Put on paint primer to the surface and then let it dry. Finish off your bunk bed frame with paint, varnish, stain, as well as sealer and leave it to dry.

Test your bunk bed prior to actual use

Remember to test your brand new bunk bed first before actual use, specifically when designed for use by small children. Look out for wobbles that may need the tightening of bolts, and also other feasible defects which may lead to your bunkbed to give at anytime.

After following these easy steps, you will be ready to enjoy a futon bunk bed that is safe, fun, and convenient for you and your family.

Author Bio: Written by Douglas R. Williams. For futon bunk bed creative concepts as well as features, you could take a look at http://www.bunkbedsnow.com/futon-bunk-bed.html

Category: Home Management
Keywords: futon bunk bed, bunk bed futon, kids futon bunk bed, bunk bed with futon

Leave a Reply