If you are looking to enhance your epoxy floor, then don\’t hesitate to ask for assistance. Yet, you will soon notice that floor paints are very easy to apply. You should reach economical, resistant to traffic, weather officials and sun (UV rays), waterproof paint. You might as well purchase anti slip paint! However, if you are smart, odds are you\’ve already selected a non slip floor.

Application

Paints can be used on any clean epoxy floors, dry wood, smooth cement, brick, etc. Options are limitless so start looking for the top colors now!

Surface Preparation

In any paint job it is very important to prepare the surface. In the case of the floor it is critical as it is subjected to a constant surface friction. Previous processes, depends the true performance of the original features of the painting (mentioned by the manufacturer on the package). As mentioned above, the surface must be clean and dry, free of grease, oil, wax, dust, mold, moisture, paints in poor condition (loose, peeling, blistered, etc.)

Shiny surfaces

Painting floors is not a hard task, yet, you must first determine your priorities. Ask yourself: Which result are you aiming for? Smooth and shiny surfaces should be sanded to achieve an optimal level of adherence, with a roughness similar to 120 grit sandpaper. Then you must clean the floor with water and detergent, and rinse. Let the floor dry before painting. In very smooth surfaces to the touch, it is always suitable to go for an acid treatment, which is usually designed to provide additional bracing and paint adhesion. Epoxy floors are much easy to paint. You don\’t really have to prepare the floor that much!

Previously Painted Surfaces

Blistered surfaces, peeling or worn should be repaired by removing loose parts with stiff brush, putty knife or sandpaper. Remove dust and apply a coat of diluted conditioner.

New surfaces

The newly built apartments have a high degree of alkalinity. In that case, you can leave within 6 months or perform the previously mentioned acid treatment, which is also useful to neutralize new surfaces that are to be painted.

Acid treatment- You can go ahead and thoroughly clean the surface with a brush, water and detergent to remove traces of grease, dirt, etc. Rinse with water. This process is very important for the substrate is suitable to start the acid treatment. You can apply muriatic acid diluted with equal parts water and leave for 10 minutes. If the degree of bubbling was very intense, apply 2 times acid in the same place with an interval of 30 seconds and then leave for 10 minutes. Once the 10 minutes after rinsing with water and finally allowed to dry at least 48 hours.

Conditioner/Sealer

Painting floors tips are at your hands. This is why you need to look out for the proper guidelines. For instance, you should purchase a conditioner to achieve a positive result. You will be applying a coat of conditioner / sealer according to manufacturer\’s instructions. The product should not form a surface film; instead, it should be absorbed into the surface.

Author Bio: Are you trying to find out more information about painting floors. Visit http://www.epoxyflooring.info for more information.

Category: Home Management
Keywords: painting floors,floors floor painting,floor painting