A beautiful swimming pool is not only based on its architectural design, but also on how you take care of the pool water. There are many requirements in order to keep your pool water clean and clear which is necessary for any type of pool. How you maintain it will be the deciding factor on the outcome of the pool’s condition.

Pool ownership requires much effort on the part of the owner as maintaining a swimming pool is demanding and exhausting at the same time. However, managing your pool and its water can be done conveniently when you know what you are doing. That is why you should be knowledgeable in this field to keep it attractive and in shape at all times. There are many great information regarding swimming pools and how to keep them in their best condition on the internet. There are lots of good articles that can give you valuable knowledge and tons of tips on how to maintain a pool.

Maintaining a pool can be divided into several portions, however what we need to focus in this article is on how to keep your pool water in good condition. All you need to do is follow these simple things to remember and accomplish on how to keep the water in check by doing the right way.

Conditioning the water should be maintained by regularly getting the accurate measurement of the TDS or total dissolved solids in the pool water. The acceptable limit for this should not exceed past 1,500 ppm or parts per million. You can check the current level of your TDS by using a water testing kit that will show you how much elements are present in your pool water.

Alkalinity, pH, and calcium hardness are essential elements that comprise the TDS level in the pool water aside from human waste and dirt. These are also checked with a water testing kit to help the pool technician or owner to determine which chemical is out of its approved range. Any element that leaves its safe zone should be taken care of immediately to avoid having water problems that can be disastrous if given little importance.

The use of chemicals sanitizers such as chlorine should also be managed properly in order to achieve the best result without overdosing the pool water with this chemical product as it can do harm to the bathers when in large quantities. Cyan uric acid is a stabilizer (conditioner) used on the pool water in order to aid and activate chlorine in disinfecting the pool water of harmful bacteria and microorganisms. Without this chemical, chlorine’s effectiveness will significantly be reduced due to the direct exposure from the sun’s UV rays and its high temperatures. However, by using this stabilizer on the pool, it helps by making chlorine stable and protected against the sun which in return can work on its optimum level.

Regular shocking of the pool can also help make it look fresh and crystal clear. Maintaining your pool’s water can be easy and fun if you follow these simple things as discussed.

Author Bio: I write for Pool Prodigy about salt water pool maintenance and how to maintain a pool.

Category: Home Management
Keywords: pool water,swimming pool,water testing,pool water aside,pool water clean,pool technician