There are two ways to deal with old metal furniture. First, bring it to junk shops to be recycled. Second, redo it and have seemingly new metal furniture that can last for yet another two or three decades. Below are some guides in redoing, refinishing and repainting metal furniture.

How to Redo Metal Furniture
When redoing metal furniture, the first step is to wash it with mild detergent and water. You can use a sponge to remove dirt especially if your furniture has been staying outside for years. You can also use wire brush or steel wool. They can help you to easily clean areas with rust and fragmenting paint or other finish.

Once clean, you can apply a rust dissolving solution. There are many different kinds of this solution but naval jelly is one of the most popular. It is great for dissolving rust on aluminium, steel and iron furniture. The solution should be on the furniture for around 10 minutes. Make sure to rinse it off and not exceed 15 minutes. You may also read directions or specifications of the solution provider.

In some cases, you will need to patch holes or damaged areas on your metal furniture. You can find metals and compounds in hardware or home supply shops. Make sure that you sand the areas you will repair.

How to Refinish Metal Furniture
After getting rid of dust, the next step is applying finish. There are different finishes that are used for metal furniture. Paint is the most common since it adds strength but does not cost much the same way as brass and plastic coating.

You will need to apply several coats of metal primer to the furniture. This will inhibit rust. Make sure to hold the spray can of primer for about 8 inches away from the furniture and let it dry before the next coating. Another to ensure is that each coat is as light as possible.

How to Repaint Metal Furniture
Among the types of finish used for metal furniture, paint finish is the most common especially for furniture manufactured or remanufactured at home. You have several options when repainting metal furniture. You can use spray paint or opt to use paint and brush. When using spray paint, you can use back and forth motions but make sure to go as light as possible. If you use brush, dip the brush to the paint and make sure you remove the excess paint before applying to the metal furniture. Otherwise, the paint will just drip. Go to small areas and put paint using small strokes ensuring that it is evenly done. You will also need to do second and even third coating so there is no need to put a lot of paint on the first.

Old furniture does not need to be thrown away or be recycled. You can redo old metal furniture. It should be easy for you to remove the dust from and refinish old metal furniture. You can easily find primer in stores. You also have the option to use brush or spray can when painting a metal furniture, which is one way of refinishing it.

Author Bio: steel tube stockists stainless steel strips steel shop

Category: Advice
Keywords: