So many times people face the problem their garage door is not working properly, after coming back from long exhausted busy day. This increases their frustration as well. It is very easy to solve this problem as little effort is require fixing it. Garage doors save us from different troubles but sometimes they become trouble for us, when they won’t open or refuse to lock. In that situations it is necessary to see if they require maintenance or replacement.

If the condition is good and the problem is little then it is better to repair it than buy a new one. Most of the time problem or hindrance arises due to the dust factor. The main area is to find the metal wheels, holes or tracks where dirt can build up. It causes an obstruction with the movement of the door and because of that door get jam. So lubrication is required in order to get rid of the friction issue. The other factor can be of the spring issue. Sometimes it can become old and lose which makes it not work properly and door become free. So a proper look is require to check the spring and must be replace when required.

So what if the garage door is in bad condition and need to be changed? In this situation a new door is required and should be installed. That type of job is very tough and labor intensive this requires lot of time, effort and patience.

First of all the measurement of the door should be taken. The length and the width of the door must be taken properly using a ruler, so that there will be no errors with the measurement. After that the door should be taken out, if the door has tension springs then it has to be taken down so that it become easy to remove the door. Panels should be removing by removing the nuts from the bolts.

Next step requires the leveling of the new door, which leads to the install of tracks and ruler. Then mark the hinges and attach the panel. It is necessary to have all the door equipment\’s, hardware panels and tools at this point. Then fasten the track is the next step.

If you get an idea that roller won\’t bind in the track, fasten it down with the screws. Fix the vertical and the horizontal track. Be careful that both the tracks align correctly. Install the new bearing and fasten the hinges.

After completing this work, cable and spring should be installing to tighten it up. Cable must be installing in the bottom so that to pull the door up. Cable winder should be used to thread it and wrap it around. New operator can be install by installing the new brackets. Make sure that the new operator is securely in place.

In the end paint the door to make it more attractive and colorful. Exterior doors are much heavy that cannot be removing or place by a single person so it is better to have a helper while removing and hanging a heavy door. It is better to wear eye protection throughout the process and take other safety measures as well.

Next, get more Builders tips – How to fix a garage door today!

Next, get more Builders tips – How to fix a garage door. Visit http://www.qhi.net.au/builders-tips-how-to-fix-a-garage-door today!

Author Bio: Next, get more Builders tips – How to fix a garage door today!

Category: Home Management
Keywords: Builders Tips – How To Fix A Garage Door