Installing bathroom shower needs expertise and knowledge in works related to pipes or plumbing, or perhaps ask an experts assistance even before starting the installation process. If you are thinking of keeping the costs as well as the work as minimal as possible then you can do the installation yourself. If you have already an existing line of pipe in your bathroom, you can take advantage of it and use it as line for your bathroom that you will install. You can save money and time on the process, just check the line to see if there’s no holes and it still working well.

Before you install the bathroom shower, make sure that the flooring can hold up the weight that you will put on. You can for an experts opinion regarding on this matter. Afterwards, you can start preparing the shower bath for installation. Have a framework that will support the bath and that is perfectly fit on the shower. You can turn the bath upside down to measure it for the framework making it more easily and with certainty. Be sure though that you have the legs of the shower positioned correctly according to that instructions included from the manufacturer. After your shower is on the right position, you can then adjust the legs to support the bath even though the floor is not even.

Fitting your taps will be very difficult and may be wasted once the bath is already in its place, therefor, this should be the next thing that you will do. The bath is very likely designed in fitting both waste as well as overflow unit. Taps will site above a gasket made of rubber that will ensure the watertight seal of the taps to the bath which will then be fixed in place underneath. Make use of a silicone in ensuring the watertight seal all over the overflow and also the waste. The waste and taps will then connect to the pipes through the flexible pipework.

Check first if the bath as well as the adjacent wall are both clean and are free of grease and dirt, then run a sanitary grade sealant on the joint and dip your fingers after in a water of soap then run your fingers over the sealant. With this, you are sure that the sealant has no gaps on its edges and it is smooth. Extend your shower hose from the mixer tap of the shower and attach it to a riser rail of the adjacent wall to give a support of the shower head. The rail permits the head of the shower to be lowered or raised to conveniently accommodate the shortest as well as the tallest people in the house.

Afterwards, attach a screen shower that will level to height of the outer edge of the bath so that your bathroom will be protected from the sprinkle of water when the shower is used. Get the right dimension of the edge and that the screen is rational to it to prevent leaking water on the edge unto the floor of the bathroom. Last but certainly not the least, always keep in mind to follow the instructions given by the bath shower manufacturer specifically.

Jessie Hosler is a design specialist and enjoys writing about any type of home decor such as vanities for bathrooms and modern bath vanities as well as other products.

Jessie Hosler is a design specialist and enjoys writing about any type of home decor such as vanities for bathrooms and modern bath vanities and other products.
http://www.tradewindsimports.com/bathroom-vanities.html
http://www.modernbathroomvanity.com/wall-mounted-modern-bathroom-vanities.html

Author Bio: Jessie Hosler is a design specialist and enjoys writing about any type of home decor such as vanities for bathrooms and modern bath vanities as well as other products.

Category: Home Management
Keywords: bathroom shower,installing bathroom shower,bathroom shower needs,shower bath,bath shower