Lumber, also known as timber, is used for a number of different purposes. It is commonly used as part of construction material to build homes or make furniture. It is also converted into pulp to make paper products. Timber is available in a rough or finished form. The rough form is used for making wood items such as furniture. The finished form is used for construction.

The wood is cut into planks and distributed for secondary purposes. The most common sizes for the cuts of wood are 2×2 and 4×4. There are several different types of timber. Each one is used for specific purposes. This is commonly referred to as engineered timber. Depending on how the wood is treated with affect what is made from the wood. Some planks are purposed for doors or roofing while others may be used for floor boards.

Natural defects often occur in the wood. Some of these defects are the result of processing the wood for distribution. These defects can include chip marks, torn and diagonal grain and wane. Other defects are caused by fungus. Fungus occurs when too much moisture gets trapped in the wood. This will affect the quality of the wood. It the fungus growth is severe, the wood cannot be used. Fungus causes various kinds of rot.

Decay is another possible defect in the wood. Decay can happen for various reasons. Certain insects can cause the wood to decay. Some of these insects are beetles, termites Cialis Professional and carpenter ants. These are issues that must be addressed if the wood is going to be used for secondary purposes. Dimensional wood cannot be used if it is decayed of insect infested.

The timber can be preserved to protect it from rot and decay. Preservatives are applied to the wood using chemical substances. Insecticides are also used to protect the wood from insects. Using these chemicals offers long term protection from elements that would otherwise cause the wood to deteriorate.

There is also timber that is first dried in a kiln before it is used. The kiln removes most of the woods moisture content. Green timber is freshly cut wood. This type of wood contains a lot of moisture. This method is not always used to dry wood. Sometimes the wood is left to air dry to remove its moisture.

Re-manufactured timber is previously milled lumber. This is wood that was cut for industrial or wood packaging use. The wood is cut using a resaw. The resaw creates thinner pieces of wood. This type of timber is good for floor boards. A lot of the work done on timber is performed at sawmills. Sawmills have been in existence for hundreds of years.

Lumber has a number of different uses. It can be used for industrial purposes or for private use. Timber can be purchased No prescription cialis at major home supply stores. Timber is also available for purchase online. When purchasing lumber it is important to know what you need. A choice has to be made between softwood or hardwood. Most construction lumber is softwood. You will also need to know the dimension of the wood. It is important to research your needs before pursuing any do it yourself project.

Author Bio: Looking to build on to that new addition you’ve always wanted or you just need to replace some trim; then visit your local lumber store. They have a wide selection of trims, boards and much more.

Category: Home/Home Improvement
Keywords: lumber, wood, marketplace, chimney, home, interior design, heat, fire, trees, hardwood, heat