If you wish to use vinyl sleeves for your compact disks instead of jewel cases, you should ensure that you have the materials and tools prepared, fold the vinyl into a rectangle, begin sewing the vinyl with a sewing appliance, bend the sleeves, transfer a compact disc to the sleeve you built, move any other components from the jewel case into the sleeve, and close the sleeve.

Jewel cases are generally used as storage for Compact disks; but, this kind of device is quite fragile and even heavy. They could occupy much space and are difficult to take around. The good thing is that you can use other styles of storage for your Cds including vinyl sleeves. Vinyl sleeves are thinner compared to jewel cases and so they occupy less space. With such type of storage, your Cds are protected from scratches and other damage. Vinyl sleeves assist you to take your Cds more easily and conveniently and you do not need to bother about damage. If you\’d like to change your jewel cases with vinyl sleeves, you could adhere to the following set of procedures:

Be sure that you have the materials and equipment prepared

For this particular project, you\’ll need a piece of transparent vinyl that is 11 inches square in dimension, a Compact disc stored in a jewel case, a sewing machine, a pen, and thread.

Fold the vinyl into a rectangle

You should find a flat workiing surace where you could work. Spread the transparent vinyl on your work space. Fold the piece of vinyl in half to make sure that it forms a rectangle approximately about 5 1/2 by 11 inches. Utilize the ruler and pen to mark the centre of the vinyl perpendicular to the fold with a line.

Begin sewing the vinyl with a sewing machine

The stitch size of the sewing appliance should be set to a long stitch or approximately 3 to 4 millimeters in length. You have to stitch a seam which measures a