For many people, making some jewellery is an art. For others, it is passion. Making jewelleries is a great way to express self and to showcase creativity. For some, making jewelleries is a good earning opportunity since people of different gender and ages love to wear jewelleries. If you want to try your hand in metal jewellery making, here are useful information about various techniques and tools used in making metal jewelleries. When you have the right tools, you will surely have an easier time making metal jewelleries. Some metal workers even use a tool organizer to ensure that they have all the necessary and correct tools. It is also necessary to have the best lighting on your workplace to ensure that there will be no mistakes with the jewelleries that you will make. Proper lighting in the work place can also be considered as a safety measure.

Common Tools
Generally, Some of the common metal tools that are used when making jewelleries are as follows: adhesives, clasps, clipping and cutting tools, gripping tools, cord knotter, magnifier, needles, pliers, wire jigs, reamers, solder paste, safety glasses, thimble pads, workplace lamps, and measuring tools.

Among the above-mentioned tools, the pliers are the most important. One cannot probably work on metal jewellery projects without pliers at hand. Pliers come in different types such as the such as the bent chain nose, chain nose, flat nose, round nose, loop closing, diagonal flush cutter, side cutter, end cutter, stone setting, and split ring pliers. There is also a special kind of pliers for gem setting.

Cutting and Clipping
Cutting and clipping are two of the most important steps in jewellery making. You can never afford to have errors in these stages. One way to do cutting and clipping well is to use the right tools. Some of the tools you can use are craft knife, laser scissors, memory wire shear, slicer, thread burner and clipper and wire nipper.

Gripping
Gripping is also an important step. Some of the tools you can use for gripping are bead stopper or holder, breading tweezers, locking tweezers, prong lifter, and ring clamp.

Soldering
There are standard steps in soldering but extra steps are necessary depending on the kind of metal that you are working on. You will need a firebrick, a ceramic tile, copper thongs, paintbrush, water and solder. You will also need torch, flux, a pickle solution and an overhead light. The pickle solution will ensure that the metal is free from grease or oil.

Filing
Filing is one of the most tedious tasks in jewellery making. It is extremely needed when you will do metal fabrication. It is done before soldering. Of course, you will need a good set of jewellery file, usually 10 files. The trick is to file in one direction just like filing your nails. Doing so will give you a flat and very smooth surface. If you are having difficulty filing in one direction, a bench pin can help.

Author Bio: steel tube stockists stainless steel strips steel shop

Category: Advice
Keywords: