Many workers who work from hazardous heights are under the false impression they have lots of time to stop themselves from falling if that should happen. Most people do not know that it takes half a second to fall four feet from 1.2 meters. The Occupational Health and Safety Regulations point out that if the drop is ten feet at least a fall protection system must be put in place. If they lose control and start falling fall arrest anchors halt any further falling.

Window washers tend to use the roof anchors the most. Once the hazards have been determined the protection strategies are established to decrease the chances of an accident from happening. The anchor point is the place where the anchor is attached. Roof anchors must be installed at work sites and can be permanent or temporary. It can withstand one thousand pounds of non-moving weight and five thousand pounds of forced weight.

The safety harness is attached to an anchor freeing the worker\’s hands to do their work. Both hands are required to use window washing equipment so a safety system should not be ignored. Window washing has several steps to execute so workers cannot have the safety equipment creating an obstacle.

Tie off points match certain roof anchoring systems. A lanyard or retractable functions as a connector to the worker who attaches this to a harness with an e ring on the back over the spine area. The worker must be trained to recognize which are the correct angles to work from to avoid swinging if they should slip. If they do slip the fall arrest systems prevent them from falling any further.

There are several types of designs available for the fall arrest anchor. Some accommodate workers who need a vertical system where they will be doing a lot of roof climbing. They require a single point anchor that can be built into the roof at construction time or added later on.

Anchors are needed in many different situations such as railcars where inspectors and maintenance personnel need access to the top of the cars. Workers on dams and bridges work under very windy and wet conditions so their anchors need to be extremely secure. The worse the outdoor conditions are the increased chance there is of slipping and falling.

Other work situations where an anchoring system is needed is on billboards and stadiums where electricians for instance need to climb to significant heights to do their electrical work. Billboards require replacement of advertising and free hands are required to get the job done. Safety equipment must be used to decrease the likelihood of an accident since one false move is all it takes.

There are also many unique falling possibilities and custom anchors can be helpful here too. Experts should be consulted as soon as an unforeseen hazard has been ascertained. Workers\’ lives will be saved by fall arrest anchors and regular check ups of each piece of the equipment will ensure more lives will not perish.When in need of window washing equipment, don\’t delay. If you are unable to reach your local suppliers, try contacting http://www.pro-bel.ca for services.

Prior to use, all components of a personal fall arrest systems must be inspected for wear, damage and other deterioration to ensure the equipment is in safe working order. Equipment in need of repair must be removed from service and replaced.
http://www.pro-bel.ca

Author Bio: When in need of window washing equipment, don\’t delay. If you are unable to reach your local suppliers, try contacting http://www.pro-bel.ca for services.

Category: Business
Keywords: industry, business, home, house, family, shopping, society, legal, health, fitness, kids, education,