Are you having problems with your filtration system? Don’t you like the sand filtration system? Then upgrade to a better facility by installing filter cartridge systems. Pool filter cartridges have a lot of benefits.

They come at affordable prices and have a long lasting life. It is an alternative to traditional filters. In case you want that traditional feel but at the same time need something which has a good performance, you can buy filter cartridges. It cleans the pool very efficiently.

Filter cartridge systems are mostly used for above ground pools. The cleaning is easier and the cost is lesser. Also you reduce the waste.

Instead of buying a new filtration unit you can place filter cartridges into the filtration units. If you are wondering about the pain taken by you to clean the cartridges, then don’t bother much. Here are some essential things about cleaning of filter cartridges below.

– First, you should buy quality filter cartridges. It makes more sense in all possible ways to do so. You might get the one which is cheap but when you work out the final expense, it would cost you more because of its less effectiveness.

– Run the system normally. When there is a requirement to clean the cartridge then neatly and carefully remove it from the filtration unit.

– Wash away the dirt from the filter using a garden hose before it dries off. You could find it difficult to remove all the dirt from the filter when it dries because it settles down in the tiny holes of the filter.

– After this, you need to dry the filter properly. The best means to dry it out is by keeping it in the sun. The sun rays kill all the algal content in the filter leaving behind a disinfected filter.

– There still might be some very fine dust in the filter. So, once you dry it, you could brush it off using a hard brush.

– If you are uncertain about the sunlight killing the algal part, then you can soak your filters in a bucket which is filled with a mixture of pool chlorine and water in the ratio 1:6.

– Soak the filters for a while allowing it to kill the bacteria and algae that are present. In case there are other organic content, the chlorine breaks them down as well.

– After a while, you need to take off the filters and rinse it thoroughly with clean water. Then dry it off nicely.

– Now the next step is to prepare a solution of muriatic acid and water and soak the filter into it so that the amount of water that can pass through the filter is reduced.

– Again leave it close for a while. Once that’s over, take it out and rinse it with a lot of fresh water so that excess acid is removed from the surface of the filter.

Now the filter is finally ready for re-installing. Be cautious when you clean you filters. A lot of chemicals are used in the cleaning so it is essential that you take all the measures to avoid any kind of problem. It is a good option to have a filter cartridge for people who want to save money but upgrade from their traditional systems of pool maintenance.

For more information, please visit our pool maintenance website.

For more information, please visit our pool maintenance website http://www.pentairfiltercartridges.com

Author Bio: For more information, please visit our pool maintenance website.

Category: Sports
Keywords: Sand Filtration,Swimming pools,Pool Maintenance,Chlorine Water Treatments ,Pool Cleaners