May workers who work at dangerous heights make the assumption that they have enough time to save themselves if they should slip and fall. The Occupational Health and Safety Regulations states that should an ascent be ten feet or over a system to prevent falls should be installed. If a person works at a height of 1.2 meters and slips they will fall four feet in half a second. Accidents occur quickly and there is no time to respond. Fall arrest anchors are designed to stop the fall immediately after it has started.

Work sites should have roof anchors installed. Window washers use this system the most. When workers are better prepared and know what strategies are available for protection from falling they know accidents will be reduced. The roof anchor can be permanent or temporary and is located at the tie off point where 1000 lbs of static weight and 5000 pounds of weight under force is supported.

Hands are free when a safety harness is worn. Window washing equipment requires free hands so a safety system must be incorporated. The window washer cannot have their actions slowed down by the safety equipment so it must be up to date and effective.

Roof anchors are created to work together with certain tie off points. A lanyard or retractable connects to the worker. This is also called a connector. This in turn is connected to the tie off point. The lanyard connects to a body harness worn by the worker. It comes with an e ring on the back. The worker must be trained so that they know for instance what the safe working angles are so that if they should slip, they will not be swung from side to side.

Many different designs are available for the fall arrest anchor. Workers whose job requires roof climbing need a system where they can climb up. These systems can be added during roof construction or later on and they can be temporary or permanent.

Other working conditions require anchors such as railcars where workers must climb to the roof of a railcar to inspect, load or unload, paint and do other maintenance operations. Other workers who must reach the top of a dam or bridge need very secure anchors since the weather conditions are wet and windy. The risk of slipping increases as the risk level increases. Workers must now allow themselves to get too complacent about safety.

Other work situations that require workers to do some climbing are stadiums and billboards. Electricians for example will need to change or install electrical components and replace advertising. Hands need to be free to do this job and safety equipment is necessary. Only one error is needed and an accident will happen.

There are instances where custom anchors must be made in the event of a unique falling accident. Fall arrest anchors help in catching the worker who has suddenly slipped and is in the midst of a fall. Each piece of equipment in the safety system must be inspected to ensure that it works properly.When in need of window washing equipment, don\’t delay. If you are unable to reach your local suppliers, try contacting http://www.pro-bel.ca for services.

Prior to use, all components of a personal fall arrest systems must be inspected for wear, damage and other deterioration to ensure the equipment is in safe working order. Equipment in need of repair must be removed from service and replaced.
http://www.pro-bel.ca

Author Bio: When in need of window washing equipment, don\’t delay. If you are unable to reach your local suppliers, try contacting http://www.pro-bel.ca for services.

Category: Business
Keywords: industry, business, home, house, family, shopping, society, legal, health, fitness, kids, education,