A Teepee is a type of cone-shaped tent house, created to operate as a portable home. The modern Teepees are usually made with canvas but previously they were mainly constructed with animal skins or birch barks. It is deeply connected to the Native Americans who were the main users of this kind of housing, they were easy to use because it could be easily assembled and disbanded whenever a clan decided to relocate to a new desitnation. Despite the fact that teepees are made small they are known to be very robust and can also survive almost any weather such as the cold, tough winds and heavy rains. It provide heat in the cold periods as well as it was cool in the summer time. Unlike other tents individuals can also start fires from inside the teepee as a way to keep warm or prepare food because it was made to be self-ventilated. To get a basic idea of how teepees look and there structure, this article will talk about how to contruct a basic teepee by yourself from start to finish.

Required Tools:

Knife or razor

Needle

Thread

Required Materials:

Canvas

Rope

12 poles

Wooden pegs

Stick

Instructions are as follows:

1. First instruction will be to trim the canvas that will be used for the teepee. Cut the canvas into a semi circle with a sharp razor or knife so that its twice as long as it is wide. It is advised to make it 15-by-30 feet and cut two smoke flaps in the center of the canvas.

2. Now cut a semi circle door entrance into each side of the canvas so that when the edges are brought together it forms a circular door entrance. Now use an additional round piece of canvas to make the door and hem a pocket into it and insert a heavy stick that will hold the door closed and stitch it onto the teepee canvas.

3. Create three little cornered pockets from portion of the canvas. Use the needle and thread to sew them to the tip of the smoke flaps. Use an extra piece of canvas to reinforce the areas of the smoke flaps where there will be a huge amount of stress.

4. Stitch a rope over the circular base at the bottom of the canvas. Then put in evenly spaced rope loops around it to firmly pin down the teepee. Then fasten a rope at the top to lash the top part onto the poles when the teepee is put upright.

5. The 12 rods for the teepee should be at least 3 feet longer than the width of the teepee covering. So for instance if the top is 15 feet in width then the poles are supposed to be 18 feet long and they need to be straight and smooth.

6. Take three of the sturdiest rods to make the tripod. Use the cord to tie the tripod as one so that it’s a bit higher than the cover. Rest the remaining of the poles alongside the tripod to create a cone shape cialis price desing for the teepee.

7. Now pull the cover around the structure and fasten them at the top with the use of wooden pegs. Peg the bottom of the cover to the ground and move the poles to extend the covering and put in two light poles into the pockets of the smoke flaps. This is the part that will work as a chimney, creating a draught.

Tips and Warnings

*When you are making a teepee, 10 feet should be the lowest height to consider because this is much less complicated to construct, cheaper to make and much simple to upkeep. However, if you are looking for a teepee that can accommodate a lot more people at a time and is smoke free then you should consider making it to be much larger one.

* You can also use different types of fabric like cotton flannel, duck or heavy unbleached muslin.

Author Bio: Please visit these links for more information on: How Viagra Jelly to Make a Teepee and Make viagra cost a Teepee.

Category: Home/Home Improvement
Keywords: Make a Teepee, DIY, Home improvement